DIN EN 61034-2 test for cable

DIN EN 61034-2 test for cable

The test of smoke density is an important aspect of the evaluation of the performance of the cable combustion, because it involves the difficulty of personnel escaping.

DIN EN 61034-2 test method

It is carried out in a volume of 27 m3, with a light meter and a fire source. The cable is required to be straight and pre – tested for 16 hours at a temperature of 23 and 5.

The test time was 40 minutes, and the smoke density test was expressed by the lowest optically permeable rate.

Our AL/PET tape would be used for DIN EN 61034-2 standard cables.